[PCB_FORUM] Re: Chasing DRCs... Vias to shape.

C A D E N C E

Chasing Around Drc's Essentially Neverending Can't Explain

-Chris



                                                                                
                                        
                       "Gene Carman"                                            
                                        
                       <gcarman@xxxxxxxxxxxxxxx>         To:   
<icu-pcb-forum@xxxxxxxxxxxxx>                            
                       Sent by:                          cc:                    
                                        
                       icu-pcb-forum-bounce@freel        Subject:    
[PCB_FORUM] Chasing DRCs...  Vias to shape.        
                       ists.org                                                 
                                        
                                                                                
                                        
                       05/17/2006 02:25 PM                                      
                                        
                       Please respond to                                        
                                        
                       icu-pcb-forum                                            
                                        
                                                                                
                                        
                                                                                
                                        
                                                                                
                                        




Using 15.2, not ready to move to 15.5.  Working on a design that has fill
(shapes) on every layer (mixed signal analog).

Very frustrated that Allegro is not clearing away fill from all the vias,
but is smart enough to make DRCs where the problem exists (D'oh!).  But the
odd thing is that when I do a local remove of the fill to correct the DRC,
it jumps to another via.  I HAVE to CHASE the DRCs...  What a frustrating
"game."

I have checked the database... often.

Anyone else see anything like this?

I am using dynamic shapes in RS-274 mode.  Running in Win2K.
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------





"This e-mail message is intended only for the use of the intended
recipient(s).
The information contained therein may be confidential or privileged, and
its disclosure or reproduction is strictly prohibited.
If you are not the intended recipient, please return it immediately to its
sender at the above address and destroy it."


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: