[PCB_FORUM] Re: Can't remember anything.
- From: Oscar Migs <o.miguelino@xxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Tue, 10 Apr 2012 09:55:23 -0700
It sounds like a firewall problem. Did IT disable UAC before installing
Cadence?
Best regards,
-oscar
On Mon, Apr 9, 2012 at 12:29 PM, <sjchar3@xxxxxxxxxxxx> wrote:
> Group,
>
> IT Loaded Cadence on a laptop (win7) and Orcad and Allegro (16.3) both
> work. I opened the schematic and ran update netlist and checked box to
> "Create or Update PCB" and "Open Board in Allegro PCB editor", but nothing
> is happening. Normally Allegro would pop up with updated board.
>
> Been awhile but is there something I'm missing, why doesn't Allegro
> automatically pop up?
>
> I also did the setup in Create Netlist, but that path keeps disappearing.
>
> Thanks for any input.
>
> Sam.
>
Other related posts: