[PCB_FORUM] Re: Cadence Design Studio 15.2

For those not on studio, we ran into a problem with Constraint Manager a
while back and Cadence told us it was because we had gone back and forth
between 15.1 and 15.2 and we shouldn't ever do that. The "fixed" the
board file for us (don't know, don't ask!) and told us never to do it
again. You can, however, safely clip data from one to the other.

 

________________________________

From: Les Wong [mailto:maveric0@xxxxxxxxxxx] 
Sent: Saturday, January 29, 2005 1:13 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Cadence Design Studio 15.2

 

Patrick:

Thank you for the infomation.

Les

westfeldt <westfeldt_nbcd@xxxxxxxxx> wrote:

        Yes.  I just did a design in Allegro 15.1, customer altered in
15.2, gave it back to me, no problem.  The Orcad sch part of the package
revs back and forth to a much wider range.

         

        Patrick Westfeldt, Jr. 
        North Boulder Circuit Design 
        westfeldt_nbcd@xxxxxxxxx 
        720-406-0887 
        c 720-272-5822 

         

         

        
________________________________


        From: Les Wong [mailto:maveric0@xxxxxxxxxxx] 
        Sent: Friday, January 28, 2005 9:46 PM
        To: icu-pcb-forum@xxxxxxxxxxxxx
        Subject: [PCB_FORUM] Cadence Design Studio 15.2

        Hi All:

         

        Is Design Studio 15.1 and 15.2 upward and downward compatible ?

         

        Thanks,

        Les

Other related posts: