[PCB_FORUM] Re: Bugs in Allegro 15.2
- From: "Paul Gingras" <paul@xxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 16 Mar 2005 08:57:47 -0500
Yup, that's why Cadence has the partnership and direct I/F into Valor.
-----Original Message-----
From: chris.ball@xxxxxxxxx [mailto:chris.ball@xxxxxxxxx]
Sent: Wednesday, March 16, 2005 8:37 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Bugs in Allegro 15.2
In my opinion, if you can't trust the output of your ECAD system:
you're using a lousy ECAD system
you're ignoring the errors it's reporting
you haven't set it up correctly
some combination of the above
Just my opinion...
"Paul Gingras"
<paul@xxxxxxx> @ VALSMTP To:
<icu-pcb-forum@xxxxxxxxxxxxx>
Sent by: @VALSMTP cc:
Subject:
[PCB_FORUM] Re: Bugs in Allegro
03/16/2005 08:28 AM 15.2
Please respond to
icu-pcb-forum
In my opinion and again this is only my opinion because this has happen to
us in much earlier releases of Allegro.
Anyone who chooses to proceed to fab without running the design thru Valor
or insuring that the fab vendor of choice runs the layout thru Valor does
so
at his or her own risk.
Paul Gingras
KAW
39 Simon St. Bldg. 4
Nashua, NH 03060
603 886 8711 x200
-----Original Message-----
From: Vivekananda R K - CTD, Chennai [mailto:vivekanandark@xxxxxxxxxxx]
Sent: Wednesday, March 16, 2005 1:44 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Bugs in Allegro 15.2
Hi,
One of the Npth hole was shorted to the plane(Positive plane). We have
provided Route and via keepout also we setted the pin property to 20 mil
over size.But still it is shorting to the plane in one layer and rest of
the
layers getting 20 mil clearence . Also not indicating the DRC.Some time it
is happening with vias also.
Why this problem coming.How we can fix this problem?Is Any body get
experienced in to this problem, pls advice the way of checking techniques
for this issue.
Regards
K.vivek
Pcb Designer
Hcl Technologies.
Chennai.
India.
DISCLAIMER
This message and any attachment(s) contained here are information that is
confidential, proprietary to HCL Technologies
and its customers. Contents may be privileged or otherwise protected by
law.
The information is solely intended for the
individual or the entity it is addressed to. If you are not the intended
recipient of this message, you are not authorized to
read, forward, print, retain, copy or disseminate this message or any part
of it. If you have received this e-mail in error,
please notify the sender immediately by return e-mail and delete it from
your computer
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
"This e-mail message is intended only for the use of the intended
recipient(s).
The information contained therein may be confidential or privileged, and
its disclosure or reproduction is strictly prohibited.
If you are not the intended recipient, please return it immediately to its
sender at the above address and destroy it."
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
