[PCB_FORUM] Re: Board Outline from .brd file to Mechancial symbol

        Another way is to do a file-export-idf

        from the pull down chose PTC

        then click the Use Filter button, then hit the filter button
        you can then pick and choose which features you'd like to
        keep.

        hit export, this exports the file.

        then go into a blank .dra and
        do file-import-idf and pick the .emn file created previously

        Similar to a subdrawing but easier because you can turn on/off
        what you want to extract from your board via the gui instead
        of having to manually pick items.

        Good Luck,
        Mike
 

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
m.kumaran@xxxxxxxxxxxxx
Sent: Thursday, October 26, 2006 12:12 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Board Outline from .brd file to Mechancial symbol

Hi

Is there any way to change the Board Outline from .brd file as
mechanical
symbol.

Regards
Kumaran M
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: