[PCB_FORUM] Re: Bmp to Allegro

Mike,
        Cadence has a free download on sourcelink that can convert a
        black and white BMP file into a PLT file. The PLT file can then
        be imported directly into Allegro.
 
 
        Use the following link for more info:
 
     http://sourcelink.cadence.com/docs/db/kdb/2005/Feb/11022718.html
               

Regards,
       Mike Finczak
       CopperCAD Design
       www.CopperCAD.com
       905-488-8958


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
gnieski_mike@xxxxxxx
Sent: Monday, April 21, 2008 2:09 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Bmp to Allegro

        I seem to remember that somewhere there was a way to convert a
bmp file into something
        that Allegro could read in, and use on a board. Does anyone have
an idea how this is accomplished?

        thanks,
        Mike Gnieski
        EMC2 Corp.

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: