[PCB_FORUM] Re: BOM report

Jim, 

Here's a zip file with a script I threw together for you. 
  I uses a few Windows versions of UNIX commands
  that I included in the zip file. 

Unzip the file bom.zip into a directory. 

Then copy your allegro brd file over to there. 

Next, open a DOS window and excute the batch file....

  If your allegro file was called "job.brd" then type:

  bom job

You will see a file created called BOM.txt

Hope that does it for you, 

      Rob Blomstrom, Senior PCB Design Engineer
      TEL +1 908 947 7054, FAX +1 908 947 7090, www.flarion.com 
      Bedminster One, 135 Route 202-206 South, Bedminster, NJ 07921

     




 
  ----- Original Message ----- 
  From: Jim Goshorn 
  To: icu-pcb-forum@xxxxxxxxxxxxx 
  Sent: Monday, September 19, 2005 3:11 PM
  Subject: [PCB_FORUM] BOM report


          Does anyone have a BOM report program from Allegro that they would be 
  willing to share, similar to this.   (Allegro 15.2, Windows XP)


          Quantity        Reference       Part number Value
  ______________________________________________

          2       CR1,CR2 DE100001-252    HFA08TB60
          2       CR3,CR5 DS100001-081    1SMB5929BT3
          2       CR4,CR6 DS100001-065    1SMB5913BT3
          2       CR7,CR8 DE100001-303    MUR860
          5       CR11,CR12,CR13,CR14,CR15        DS100001-129    FYV0704S


  Thanks
  Jim Goshorn

Other related posts: