[PCB_FORUM] Re: Assigning Xnet to a Relay

Xnets are for passive devices primary resistors, capacitors. You would
have to set the relay model up as a discrete device I would suppose.

 

Gerry Meier, Sr. PCB Designer

Freedom CAD Services. Inc

Voice: (256)776-7470 or (603) 864-1350

Email:gerry.meier@xxxxxxxxxxxxxx

visit us at http://www.freedomcad.com

 

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of seiji arimitsu
Sent: Monday, December 15, 2008 12:49 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Assigning Xnet to a Relay

 

Hello All,
 
I am trying to assign the Xnet property to a 8 pin relay.
 
1 2  3  4
O O O O
O O O O
8 7  6  5
 
Pins 1, 6, and 7 are GND and pin 2 is PWR.  
 
pins 4 and 5 is same net and would like to set up the xnet with Pin 8.
 
How would I set the device model to accomplish this?  If anyone could
help I would appreciate it.
 
Thank you,
Seiji

Other related posts: