[PCB_FORUM] Re: Artwork - rotated pads

Alexis:
 
Make sure that the film records have
Use aperture rotation - checked
 
Les

--- On Tue, 3/31/09, ameehan@xxxxxxxxxxxxxx <ameehan@xxxxxxxxxxxxxx> wrote:


From: ameehan@xxxxxxxxxxxxxx <ameehan@xxxxxxxxxxxxxx>
Subject: [PCB_FORUM] Artwork - rotated pads
To: icu-pcb-forum@xxxxxxxxxxxxx
Date: Tuesday, March 31, 2009, 5:29 PM



#yiv1214664776 {font-family:Geneva, Arial, Helvetica, 
sans-serif;font-size:9pt;background-color:#ffffff;color:black;}

Tool: Version 16.2, Allegro Expert. I can't find the solution on Sourcelink, so 
am hoping this group can help. We have an old layout with a couple of surface 
mount connectors rotated at 160 degrees. The pads are not photoplotting 
correctly, although they must have at one time since we built boards a few 
years ago. The viewlog says: 
WARNING: The following pads were simulated with line draws
  because the appropriate geometry was not in the aperture table:
 (GEOMETRY)      (WDT)   (HGT)   (ROTATION)
 Pad RECTANGLE   30.00   175.00      70.000  at (2545.35,1328.31)
The pads are being drawn in at 90 degrees. Settings I'm using are: Gerber 4x00, 
Format 2.5,  and "Draw missing pad apertures" is checked. I've recreated the 
aperture list using with and without rotation. What am I missing? Thanks for 
any help you can provide.
Alexis Meehan, Opnext, Inc.


 ----------------------------------------------------------- To 
subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe To view the archives of this list go 
to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send 
an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
-----------------------------------------------------------

Other related posts: