[PCB_FORUM] Artwork - rotated pads

From: ameehan@xxxxxxxxxxxxxx
To: icu-pcb-forum@xxxxxxxxxxxxx
Date: Tue, 31 Mar 2009 20:29:09 -0400 (EDT)

Tool: Version 16.2, Allegro Expert. I can't find the solution on Sourcelink, so am hoping this group can help. We have an old layout with a couple of surface mount connectors rotated at 160 degrees. The pads are not photoplotting correctly, although they must have at one time since we built boards a few years ago. The viewlog says:

WARNING: The following pads were simulated with line draws
because the appropriate geometry was not in the aperture table:
(GEOMETRY) (WDT) (HGT) (ROTATION)
Pad RECTANGLE 30.00 175.00 70.000 at (2545.35,1328.31)

The pads are being drawn in at 90 degrees. Settings I'm using are: Gerber 4x00, Format 2.5, and "Draw missing pad apertures" is checked. I've recreated the aperture list using with and without rotation. What am I missing? Thanks for any help you can provide.

Alexis Meehan, Opnext, Inc.

----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------

[PCB_FORUM] Artwork - rotated pads

Other related posts: