That's exactly what happened to me. I followed your advices and it works. Thank you. ----- Original Message ---- From: "ARIES_LUMAGUE@xxxxxxxxxxx" <ARIES_LUMAGUE@xxxxxxxxxxx> To: icu-pcb-forum@xxxxxxxxxxxxx Sent: Thursday, July 3, 2008 8:03:14 AM Subject: [PCB_FORUM] Re: Artwork error We usually have this artwork problem when we are creating artwork file using the Gerber RS274X Device type in General Parameters and having Static and Dynamic Shapes overlapping with each other (typically static shapes are from the components and Dynamic shapes are from area fills of nets) We have the following options 1. Use Gerber 6x00 Device Type option 2. Make both shape the same (static or Dynamic) then merge the shape -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Reade, Sue Sent: Wednesday, July 02, 2008 9:02 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Artwork error This may be one of the bugs in Allegro. Which level are you using? Do you have the latest ISR patch? In one of the 15X levels dynamic shapes with voids would implode making the shape causing the error to be invisble. Go to display and make sure that your "stackup" "boundary layer" is turned on, if you can find the shape delete it and start again. -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Nha Le Sent: Wednesday, July 02, 2008 6:39 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Artwork error Hi all, When I create artwork, an error message is displayed says that: ERROR: aborting film - Shape with first seg=(644.327 503.002) [layer=TOP] has a void with extents [(-625.002 574.998) (525.002 655.002)] that touches another shape with first seg=(-555.945 639.370). Manually resolve problem. ERROR: aborting film - artwork will not be generated! Error in TOP--halting output. Artwork file not generated. *** ERROR with TOP How can I abort this error and generate this artwork file? Thanks in advance. ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------