[PCB_FORUM] Re: Anyone install v16 on W2k?

...and it says this in the release documentation:

"Operating System
 Windows 2003 Server, all Service Packs; Windows XP Professional; Windows
Vista Enterprise (32 bit)

Note:  Cadence SPB products do not support Windows 2000, Windows XP Home
Edition, Windows NT operating system (versions 4.0 and earlier), or Windows
Vista (64 bit)."

Sigh.  I wish an important point like this was consistent across their
documentation.

Regards,

Austin

> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Austin Franklin
> Sent: Tuesday, July 24, 2007 5:46 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Anyone install v16 on W2k?
>
>
> Hi Michael,
>
> Thanks for that link!  It shows conflicting information for SPB16!  One
> document shows 2000/XP (the "Supported Platform Matrix for Cadence
> Applications") and the download page shows XP/Vista only.  Interesting.
>
> Regards,
>
> Austin
>
> > -----Original Message-----
> > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Michael
> > Catrambone
> > Sent: Tuesday, July 24, 2007 3:57 PM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: Anyone install v16 on W2k?
> >
> >
> > Hey Dave,
> >
> > I went digging for this information on Sourcelink after I received the
> > EOL notice for Solaris 8 and 9 on SPARC based systems which made Solaris
> > 10 the new baseline OS for SPARC platforms.
> >
> > Here is the URL link to the platform support web page on Sourcelink:
> >
> > http://sourcelink.cadence.com/docs/files/lifecycle/platformmain.html
> >
> > On this page you will find links to the Cadence Platform Roadmap,
> > Supported Platform Matrix, End of Life Platform Support Notices and
> > Recommended platform patches for systems running Cadence products.
> >     Great reading!
> >
> > Hope this helps,
> > Michael Catrambone
> > UTStarcom, Inc.
> >
> > -----Original Message-----
> > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
> > Sent: Tuesday, July 24, 2007 2:29 PM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: Anyone install v16 on W2k?
> >
> > Mike,
> >
> > Where do I get a copy of the support plan?
> >
> > My local Sales rep is telling me something different.
> >
> > My Maintance expired in May, and now I can't download
> > the stuff. Trying to figure out  if to renew.
> >
> >
> > Thanks,
> > Dave
> >
> >
> >
> > Michael Catrambone wrote:
> >
> > >Austin,
> > >
> > >According to the platform support plan, Win2K is no longer supported on
> > >new base release in 2007 but will continue to be supported through the
> > >lifecycle of releases before 16.X.
> > >
> > >To answer your question, all of my testing was on Solaris 9 / WinXP and
> > >did not load it on Win2K.  I am in the process of moving to Solaris 10
> > >because Solaris 9 will be off support by the end of the year and I will
> > >begin testing on Solaris 10 shortly.
> > >
> > >Hope this helps,
> > >Michael Catrambone
> > >UTStarcom, Inc.
> > >
> > >
> > >-----Original Message-----
> > >From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> > >[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin
> > Franklin
> > >Sent: Monday, July 23, 2007 10:21 AM
> > >To: icu-pcb-forum@xxxxxxxxxxxxx
> > >Subject: [PCB_FORUM] Anyone install v16 on W2k?
> > >
> > >Hi,
> > >
> > >The Cadence web site says V16 only supports XP and Vista...so I am
> > >curious
> > >if anyone here has tried it on W2k successfully?
> > >
> > >Regards,
> > >
> > >Austin
> > >
> > >-----------------------------------------------------------
> > >To subscribe/unsubscribe:
> > >Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > >with a subject of subscribe or unsubscribe
> > >
> > >To view the archives of this list go to
> > >http://www.freelists.org/archives/icu-pcb-forum/
> > >
> > >Problems or Questions:
> > >Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > >-----------------------------------------------------------
> > >-----------------------------------------------------------
> > >To subscribe/unsubscribe:
> > >Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > >with a subject of subscribe or unsubscribe
> > >
> > >To view the archives of this list go to
> > http://www.freelists.org/archives/icu-pcb-forum/
> > >
> > >Problems or Questions:
> > >Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > >-----------------------------------------------------------
> > >
> > >
> > >
> >
> > --
> > Dave Seymour, CID+
> > Catapult Communications Inc.
> > 800 Perimeter Park Dr, Suite A
> > Morrisville, NC 27560
> >
> > Direct: (919)653-4249
> > Main: (919)653-4180
> > Fax: (919)653-4297
> >
> > Dave.seymour@xxxxxxxxxxxx
> >
> >
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> > http://www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > -----------------------------------------------------------
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: