[PCB_FORUM] Re: Anyone install v16 on W2k?

Hi Michael,

Thanks for that link!  It shows conflicting information for SPB16!  One
document shows 2000/XP (the "Supported Platform Matrix for Cadence
Applications") and the download page shows XP/Vista only.  Interesting.

Regards,

Austin

> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Michael
> Catrambone
> Sent: Tuesday, July 24, 2007 3:57 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Anyone install v16 on W2k?
>
>
> Hey Dave,
>
> I went digging for this information on Sourcelink after I received the
> EOL notice for Solaris 8 and 9 on SPARC based systems which made Solaris
> 10 the new baseline OS for SPARC platforms.
>
> Here is the URL link to the platform support web page on Sourcelink:
>
> http://sourcelink.cadence.com/docs/files/lifecycle/platformmain.html
>
> On this page you will find links to the Cadence Platform Roadmap,
> Supported Platform Matrix, End of Life Platform Support Notices and
> Recommended platform patches for systems running Cadence products.
>       Great reading!
>
> Hope this helps,
> Michael Catrambone
> UTStarcom, Inc.
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
> Sent: Tuesday, July 24, 2007 2:29 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Anyone install v16 on W2k?
>
> Mike,
>
> Where do I get a copy of the support plan?
>
> My local Sales rep is telling me something different.
>
> My Maintance expired in May, and now I can't download
> the stuff. Trying to figure out  if to renew.
>
>
> Thanks,
> Dave
>
>
>
> Michael Catrambone wrote:
>
> >Austin,
> >
> >According to the platform support plan, Win2K is no longer supported on
> >new base release in 2007 but will continue to be supported through the
> >lifecycle of releases before 16.X.
> >
> >To answer your question, all of my testing was on Solaris 9 / WinXP and
> >did not load it on Win2K.  I am in the process of moving to Solaris 10
> >because Solaris 9 will be off support by the end of the year and I will
> >begin testing on Solaris 10 shortly.
> >
> >Hope this helps,
> >Michael Catrambone
> >UTStarcom, Inc.
> >
> >
> >-----Original Message-----
> >From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> >[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin
> Franklin
> >Sent: Monday, July 23, 2007 10:21 AM
> >To: icu-pcb-forum@xxxxxxxxxxxxx
> >Subject: [PCB_FORUM] Anyone install v16 on W2k?
> >
> >Hi,
> >
> >The Cadence web site says V16 only supports XP and Vista...so I am
> >curious
> >if anyone here has tried it on W2k successfully?
> >
> >Regards,
> >
> >Austin
> >
> >-----------------------------------------------------------
> >To subscribe/unsubscribe:
> >Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >with a subject of subscribe or unsubscribe
> >
> >To view the archives of this list go to
> >http://www.freelists.org/archives/icu-pcb-forum/
> >
> >Problems or Questions:
> >Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >-----------------------------------------------------------
> >-----------------------------------------------------------
> >To subscribe/unsubscribe:
> >Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >with a subject of subscribe or unsubscribe
> >
> >To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
> >
> >Problems or Questions:
> >Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >-----------------------------------------------------------
> >
> >
> >
>
> --
> Dave Seymour, CID+
> Catapult Communications Inc.
> 800 Perimeter Park Dr, Suite A
> Morrisville, NC 27560
>
> Direct: (919)653-4249
> Main: (919)653-4180
> Fax: (919)653-4297
>
> Dave.seymour@xxxxxxxxxxxx
>
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: