[PCB_FORUM] Re: Anyone install v16 on W2k?

Hey Dave,

I went digging for this information on Sourcelink after I received the
EOL notice for Solaris 8 and 9 on SPARC based systems which made Solaris
10 the new baseline OS for SPARC platforms.  

Here is the URL link to the platform support web page on Sourcelink:

http://sourcelink.cadence.com/docs/files/lifecycle/platformmain.html

On this page you will find links to the Cadence Platform Roadmap,
Supported Platform Matrix, End of Life Platform Support Notices and
Recommended platform patches for systems running Cadence products.
        Great reading! 

Hope this helps,
Michael Catrambone
UTStarcom, Inc.

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Tuesday, July 24, 2007 2:29 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Anyone install v16 on W2k?

Mike,

Where do I get a copy of the support plan?

My local Sales rep is telling me something different.

My Maintance expired in May, and now I can't download
the stuff. Trying to figure out  if to renew.


Thanks,
Dave



Michael Catrambone wrote:

>Austin,
>
>According to the platform support plan, Win2K is no longer supported on
>new base release in 2007 but will continue to be supported through the
>lifecycle of releases before 16.X.
>
>To answer your question, all of my testing was on Solaris 9 / WinXP and
>did not load it on Win2K.  I am in the process of moving to Solaris 10
>because Solaris 9 will be off support by the end of the year and I will
>begin testing on Solaris 10 shortly.
>
>Hope this helps,
>Michael Catrambone
>UTStarcom, Inc.
>
>
>-----Original Message-----
>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin
Franklin
>Sent: Monday, July 23, 2007 10:21 AM
>To: icu-pcb-forum@xxxxxxxxxxxxx
>Subject: [PCB_FORUM] Anyone install v16 on W2k?
>
>Hi,
>
>The Cadence web site says V16 only supports XP and Vista...so I am
>curious
>if anyone here has tried it on W2k successfully?
>
>Regards,
>
>Austin
>
>-----------------------------------------------------------
>To subscribe/unsubscribe: 
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to
>http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------
>-----------------------------------------------------------
>To subscribe/unsubscribe: 
>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>with a subject of subscribe or unsubscribe
>
>To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>-----------------------------------------------------------
>
>  
>

-- 
Dave Seymour, CID+
Catapult Communications Inc.
800 Perimeter Park Dr, Suite A
Morrisville, NC 27560

Direct: (919)653-4249
Main: (919)653-4180
Fax: (919)653-4297

Dave.seymour@xxxxxxxxxxxx


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: