[PCB_FORUM] Re: Anyone install v16 on W2k?

Mike,

Where do I get a copy of the support plan?

My local Sales rep is telling me something different.

My Maintance expired in May, and now I can't download
the stuff. Trying to figure out  if to renew.


Thanks,
Dave



Michael Catrambone wrote:


Austin,

According to the platform support plan, Win2K is no longer supported on
new base release in 2007 but will continue to be supported through the
lifecycle of releases before 16.X.

To answer your question, all of my testing was on Solaris 9 / WinXP and
did not load it on Win2K.  I am in the process of moving to Solaris 10
because Solaris 9 will be off support by the end of the year and I will
begin testing on Solaris 10 shortly.

Hope this helps,
Michael Catrambone
UTStarcom, Inc.


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Monday, July 23, 2007 10:21 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Anyone install v16 on W2k?

Hi,

The Cadence web site says V16 only supports XP and Vista...so I am
curious
if anyone here has tried it on W2k successfully?

Regards,

Austin

-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------



--
Dave Seymour, CID+
Catapult Communications Inc.
800 Perimeter Park Dr, Suite A
Morrisville, NC 27560

Direct: (919)653-4249
Main: (919)653-4180
Fax: (919)653-4297

Dave.seymour@xxxxxxxxxxxx


-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: