Jean, This is what you need to do: If you are running both Allegro and Allegro viewer you will need to edit your allegro.ini file. and Delete the Allegro Viewer Section If you are only running the viewer - you can delete or rename you allegro.ini file Regards, Gerry Gerry Meier Sr. PCB Designer Freedom CAD Services, Inc. Voice: (603) 864-1300 x1350 Alt. Voice: (386) 753-0048 Email: gerry.meier@xxxxxxxxxxxxxx visit our website at<http://www.freedomcad.com <http://www.freedomcad.com/> ________________________________ From: Jean Bratton Sent: Tuesday, December 21, 2004 3:09 PM To: Designers; icu-pcb-forum@xxxxxxxxxxxxx Subject: Allegro viewer not showing Options/Find/Visibility Hi all, We have a customer that has just loaded the 15.2 viewer. When he brings boards up they come up OK, but the Options/Find/Visibility tabs usually seen at the right of his screen are missing. I looked in the viewer to see if you could undock them like you can in Allegro, but it doesn't appear you can. Does anyone know where else this portion of the screen might be hiding? Thanks, Jean Jean Bratton Sr. Printed Circuit Designer Freedom CAD Services, Inc. 603-864-1300 x1349