[PCB_FORUM] Re: Allegro to Capture BackAnnotation....

What I do is change my logic in ORCAD Capture, then create a new netlist and 
import the logic to Allegro. The schematic drives the PCB layout, and assembly  
in our case. The only thing we ever change and back annotate to capture is 
reference designators and occasionally do pin swaps, and gate swaps. It would 
be nice though if constraint manager worked with capture!
 
Carl

-----Original Message-----
From: sureshbabu [mailto:suresh@xxxxxxxxxxxxxxx]
Sent: Tuesday, September 07, 2004 2:36 AM
To: ICU Forum
Subject: [PCB_FORUM] Allegro to Capture BackAnnotation....


 
Hi,
 
    I've created new nets in Allegro ( PCB Design Expert V14.2) Logic>Netlogic 
and would like to backannotate them into Orcad Capture.  Allegro online help 
says that the Nets created using Netlogic menu cannot be brought into Capture. 
What's everybody doing to include the new nets in Allegro into Capture? Drawing 
the Wires manually ?

 Is there any other option to do this? Please help...
 
Thanks in Advance...
 
Regards,

Suresh

Other related posts: