[PCB_FORUM] Allegro and Wildfire2

Hi all
We recently migrated from Pro/E 2001 to Wildfire2 for our IDF import/export.
There are definitely performance problems when importing IDF files from 
Allegro.  (ie, it's a Wildfire problem.)  It can take the good part of one hour 
to import.   Has anyone else witnessed this?  It was magnitudes better in Pro/E.
We always filter all vias and we are sometimes forced to delete smaller 
components, although this is not desirable as we like a full mechanical model.  
Component counts are usually a few thousand, say 3000-5000.
We are going through PTC support as well, but any other pointers would be great.
Cheers,
Richard
  
__________________________
Richard Moffat
PCB CAD Manager
Allied Telesyn Research Ltd, NZ.
ph. +64 (3) 3393000
richard.moffat@xxxxxxxxxxxxxxxxxxx



NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesyn Research Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesyn Research.

Other related posts: