[PCB_FORUM] Re: Allegro V6.01 Constraint Manager

Thanks so much for the help
Will try this
Regards
S. Attia

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] 
Sent: Wednesday, February 27, 2008 1:12 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro V6.01 Constraint Manager

Soledad
  Logic
    -net schedule RMB insert T (this should be the midpoint of route
 Setup Constraints
    Relative propagation delay 
     Select net create pin pair
        Create match group 


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Soledad Attia
Sent: Wednesday, February 27, 2008 3:58 PM
To: Soledad Attia; icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Allegro V6.01 Constraint Manager

Hi All,
 

We just recently upgraded to Allegro V6.01 and have been trying to work
with the constraint Manager to create matching lengths for a bus; but
have not been able to.
Does anyone know the sequence of steps to accomplish this? and willing
to share the information?
Appreciate any help
Thanks
S. Attia
Printronix Inc
Irvine, Ca.
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: