[PCB_FORUM] Re: Allegro V6.01 Constraint Manager

Thanks so much Austin, I don't know for sure of the differences, have
been just focused on the Constraint manager which we have never used and
trying to follow the documentation, but nothing seems to work.
Very greatful for your help
Regards
Soledad

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Wednesday, February 27, 2008 1:07 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro V6.01 Constraint Manager

Hi Soledad,

Are there any series resistors in these nets?

I'll point you in the right direction when I get some free time a little
later.  I may just setup a small board for you to see what I did.  I'm
on
15.2.  Is there some difference between 15.2 and 16.01 that you know of?

Regards,

Austin

> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Soledad Attia
> Sent: Wednesday, February 27, 2008 3:58 PM
> To: Soledad Attia; icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Allegro V6.01 Constraint Manager
>
>
> Hi All,
>
>
> We just recently upgraded to Allegro V6.01 and have been trying to
work
> with the constraint Manager to create matching lengths for a bus; but
> have not been able to.
> Does anyone know the sequence of steps to accomplish this? and willing
> to share the information?
> Appreciate any help
> Thanks
> S. Attia
> Printronix Inc
> Irvine, Ca.
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: