[PCB_FORUM] Re: Allegro V6.01 Constraint Manager

Hi Soledad,

Are there any series resistors in these nets?

I'll point you in the right direction when I get some free time a little
later.  I may just setup a small board for you to see what I did.  I'm on
15.2.  Is there some difference between 15.2 and 16.01 that you know of?

Regards,

Austin

> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Soledad Attia
> Sent: Wednesday, February 27, 2008 3:58 PM
> To: Soledad Attia; icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Allegro V6.01 Constraint Manager
>
>
> Hi All,
>
>
> We just recently upgraded to Allegro V6.01 and have been trying to work
> with the constraint Manager to create matching lengths for a bus; but
> have not been able to.
> Does anyone know the sequence of steps to accomplish this? and willing
> to share the information?
> Appreciate any help
> Thanks
> S. Attia
> Printronix Inc
> Irvine, Ca.
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: