[PCB_FORUM] Allegro V15 help with copper shape

Hello Allegro V15 Gurus,

We got pcb file from customer in order to make panelization. 
I'm trying to create gerbers (on format Gerber6X60-this is only requirement of 
our 
fab. vendor) and on top side (l01) during creating gerber I got zillions 
error "Can't fill shape at (x.xxx, y.yyy). 
If I start to eliminate those small area I will loose the integrity of 
grounding 
shielding on pcb. 
So my question is:  
Why Allegro lets create shape in small areas, during shape checking
it (Allegro) finds 0 problem and finally during creating gerbers it can NOT
fill out those spats?
 How do you handle this situation? Is the way to create 
gerber (on Gerber6x60 format) and not to change copper shape?  
 
 
Regards, 
OLEG KIPNIS 
x8286 

PCB Layout Designer 
SMART  Modular Technologies, Inc. 
4211 Starboard Drive 
Fremont, CA 94538 
Direct: 510-624-8286    Fax: 510-624-8195 



  _____

Other related posts: