[PCB_FORUM] Re: Allegro ODB++

I meant to add:

Does anyone know when IPC-2581 will be implemented by CAD vendors?  

>>> "richard moffat" <richard.moffat@xxxxxxxxxxxxxxxxxxx> 27/04/2007 10:02 a.m. 
>>> >>>
Hi

Whether to use ODB++ or other formats can be a religious argument.

Rather than repeat what I've said before, read 
http://www.freelists.org/archives/icu-pcb-forum/05-2006/msg00104.html 
instead.

Once ODB++ is more flexible, we may look at it again.  (I have other slight 
reservations that I won't go into here.)

Until then, we have Allegro and Gerbtool customised to an extent that gives us 
a 'one button click' solution for all our generation, electrical validation, 
and CAM validation.

Cheers,
Richard



  
__________________________
Richard Moffat
PCB CAD Team Leader
Allied Telesis Labs
ph. +64 (3) 3393000
richard.moffat@xxxxxxxxxxxxxxxxxxx 

>>> Dave Schaefer <dave.schaefer@xxxxxxx> 27/04/2007 5:37 a.m. >>>
Would like to get other user's thoughts on the use of ODB++:

- are you using ODB++ for fabrication, manufacturing, ICT
- does the Allegro "ODB++ inside" translator produce accurate and reliable data
- how do you verify the accuracy of your ODB++ data
- if using ODB++, do you provide additonal data/drawing formats
- any other pros/cons of ODB++ use

Thanks,
Dave

Dave Schaefer
dave.schaefer@xxxxxxx 
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/ 

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
-----------------------------------------------------------

NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesis Labs Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesis Labs.
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/ 

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
-----------------------------------------------------------

NOTICE: This message contains privileged and confidential
information intended only for the use of the addressee
named above. If you are not the intended recipient of
this message you are hereby notified that you must not
disseminate, copy or take any action in reliance on it.
If you have received this message in error please
notify Allied Telesis Labs Ltd immediately.
Any views expressed in this message are those of the
individual sender, except where the sender has the
authority to issue and specifically states them to
be the views of Allied Telesis Labs.
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: