[PCB_FORUM] Re: Allegro ODB++

 
From a design services provider viewpoint:

Yes - are you using ODB++ for fabrication, manufacturing, ICT
Yes, it's preferred by most fabs because they use valor front ends - does the 
Allegro "ODB++ inside" translator produce accurate
and reliable data
Import it into a cheapo DFM tool that I have less faith in than the translator! 
- how do you verify the accuracy of your ODB++
data
Yes, 274X + drill + NC route + IPC-356A + test fixtures + DXF + IDF + reports + 
netlists + pick and place + pdf + ........- if
using ODB++, do you provide additonal data/drawing formats
You can't import it back into allegro directly (selectively importing say etch 
would be something) - any other pros/cons of
ODB++ use

Best Regards
 
David Greig


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Schaefer
Sent: 26 April 2007 18:38
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Allegro ODB++ 

Would like to get other user's thoughts on the use of ODB++:

- are you using ODB++ for fabrication, manufacturing, ICT
- does the Allegro "ODB++ inside" translator produce accurate and reliable data
- how do you verify the accuracy of your ODB++ data
- if using ODB++, do you provide additonal data/drawing formats
- any other pros/cons of ODB++ use

Thanks,
Dave

Dave Schaefer
dave.schaefer@xxxxxxx
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
--
Virus scanned by Lumison.

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: