[PCB_FORUM] Re: Allegro ODB++

I have used nothing but ODB++ since 1998 of course all jobs are run
through Valor before release. 

 Gerry


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Schaefer
Sent: Thursday, April 26, 2007 12:38 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Allegro ODB++ 

Would like to get other user's thoughts on the use of ODB++:

- are you using ODB++ for fabrication, manufacturing, ICT
- does the Allegro "ODB++ inside" translator produce accurate and
reliable data
- how do you verify the accuracy of your ODB++ data
- if using ODB++, do you provide additonal data/drawing formats
- any other pros/cons of ODB++ use

Thanks,
Dave

Dave Schaefer
dave.schaefer@xxxxxxx
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: