[PCB_FORUM] Re: Allegro Module Reuse Question...
- From: "Deac Descoteaux" <deac007@xxxxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Thu, 8 Nov 2007 22:14:15 -0500
Hello Danny,
We have a module that is directive by our program manager's. If you are
willing, please let us take a look at you file. We'll come up with possible
routing solutions for you that will increase you PCB deign output two fold.
Come on.......................give us a shot to prove to you that we can
increase your through-put.
Deac
On 11/8/07, Danny <simpsond1@xxxxxxxxxxxxx> wrote:
>
> Hi,
>
> I am about the attempt to use Allegro Module Reuse for a set of components
> consisting of an FPGA as well as many passive components associated with
> it.
> This will be repeated many times...
>
> In going through a quick tutorial regarding Module Reuse, it mentions when
> *Annotating* the part references in Capture / Allegro Design Entry:
>
> "In the Action section select either:
> a. Incremental - If checked, Capture updates parts with a question mark in
> the
> part reference.
> b. Unconditional - If checked, Capture updates all parts in the selected
> schematic pages. Both part reference and package information may be
> updated on existing parts. Parts on different schematic pages are not
> packaged together."
>
> It's this last line that has me stumped. Does this mean that if I have a
> large
> part such as an FPGA scattered across several pages, I cannot use Allegro
> Design
> Reuse since "Parts on different schematic pages are not packaged
> together."?
>
>
> Thanks,
>
> Danny Simpson
>
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
--
Deac Descoteaux
PalPilot East Coast
71 Spitbrook Road, Suite #307
Nashua, NH 03060
(Office phone) 603-888-3400 ext.10
(fax) 603-888-3500
(Toll Free) (887) PALPILOT
- Follow-Ups:
- [PCB_FORUM] OrCAD CIS issue... Junction Dots.
- From: Gene Carman
- References:
- [PCB_FORUM] Allegro Module Reuse Question...
- From: Danny
Other related posts:
- » [PCB_FORUM] Allegro Module Reuse Question...
- » [PCB_FORUM] Re: Allegro Module Reuse Question...
- [PCB_FORUM] OrCAD CIS issue... Junction Dots.
- From: Gene Carman
- [PCB_FORUM] Allegro Module Reuse Question...
- From: Danny