[icu-pcb-forum] Allegro Dynamic Shapes - Reduce clearance

All,

I have been working on PSD 15 for a while and
have not find a way to reduce the clearance on a
given shape. Basically I have a 1247 pin BGA with
8 different voltages that require external positive
shapes connecting to them on the bottom side.

In these cases I was able to change the via to
shape clearance to 5 mils to allow shape to flood
around the vias. The dynamic shapes parameter
form only give me the ability to oversize the
clearance not undersize it which I need.

I could add a Constraint Area but I have been
trying to stay away from them because of all
the related problems with using them.

Any ideas.

Thanks in advance,
Mike


-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: