[PCB_FORUM] Re: Allegro 16.0 Graphics

I discuss with hotline guy  couple weeks ago and allegro use now opengl to display.
Look at graphics cards with good support of opengl (maybe matrox?)

Jean-Charles

Peter Hughes a écrit :

Hi All,

 

We are currently looking at new computers for Allegro 16.0. What has been the experience of the forum with the new graphics in 16.0. We have tried a Sapphire Radeon X1550 Series (512Mb) graphics card but we are not impressed with the results. If the screen is busy then the system is very jerky.

 

What make/type of graphics card is recommended for 16.0?

 

Rgrds

 

Peter Hughes,

PCB Designer,

Concurrent Technologies,

4 Gilberd Close,

Newcomen Way,

Colchester,

Essex,

CO4 4WN.

Tel: +44 1206 752626

Fax: +44 1206 751116

 

----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------------------------

Other related posts: