[PCB_FORUM] Re: Allegro 15.7 duplicate vias
- From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Thu, 8 Jul 2010 16:39:16 -0400
> I too like this forum better than the cadence one. faster, leaner and most of
> the time i get an answer.
Ditto, I think there’s enough of us to keep it alive.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R & D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of sjchar3@xxxxxxxxxxxx
Sent: Thursday, July 08, 2010 2:16 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
16.3 does via removals.
I too like this forum better than the cadence one. faster, leaner and most of
the time i get an answer.
sam
-----Original Message-----
From: Macindoe, Gary <Gary.Macindoe@xxxxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Thu, Jul 8, 2010 10:14 am
Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
Les,
Maybe the Dangling Lines Report (Tools -> Reports) will give you the
information
you need.
Like Joe said, if there are two vias in the same location, you should get a DRC
error.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R & D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com <http://www.covidien.com/>
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx
<mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx?> ]
On Behalf Of Les Wong
Sent: Thursday, July 08, 2010 9:17 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
Jean-Charles
I looked in the dbdoctor.log file but did not see any duplicate via messages ?
Les
--- On Thu, 7/8/10, JCharles TEYSSIER <jeancharles.teyssier@xxxxxxx> wrote:
> From: JCharles TEYSSIER <jeancharles.teyssier@xxxxxxx>
> Subject: [PCB_FORUM] Re: Allegro 15.7 duplicate vias
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Date: Thursday, July 8, 2010, 2:22 AM
> Dave,
>
> i am also on cadence's community BUT _i_ considere this
> "forum" more easyer to use each day...
>
> I have respond to somebody on cadence's community; this
> person rspond and when i try to respond ... the web site
> does nor allow me to...(internal error)
> I think i would retry later... this is not first time i
> have problems with cadence's site
>
> Emails NEVER fails; cadence's web site does.
> And it bory me with log-in each time!
>
> THIS place is much more easier. When cadence's community
> site will be much more userfreindly (less flash animations,
> more reliebality) it will be a real good place
>
> Les,
>
> dbdoctor generates a log file: you can find in it the
> coordonates of duplicated vias so you can remove them
> manually.
>
> Jean-Charles
>
> Les Wong a écrit :
> > Hi Dave
> > Thanks,
> > Les
> >
> > --- On *Wed, 7/7/10, David Elder /<dave.elder@xxxxxxxxxxxxx>/*
> wrote:
> >
> >
> > From: David Elder <dave.elder@xxxxxxxxxxxxx>
> > Subject: Re: [PCB_FORUM]
> Allegro 15.7 duplicate vias
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Date: Wednesday, July 7, 2010,
> 2:42 PM
> >
> > Hi Les,
> > This forum doesn't
> get much use any more. You might want to
> > consider moving over to the
> cadence community forum -
> > http://www.cadence.com/community/forums/27.aspx
> > Anyway - attached is
> some code that identifies duplicate hits on
> > holes and vias.
> > Regards,
> > Dave
> >
> > Dave Elder
> > PCB Design Manager
> > Tait Radio Communications
> > 535 Wairakei Rd, PO Box 1645,
> Christchurch
> > DDI: +64 3 358-0327
> > Mobile: +64 21 373725
> > www.taitradio.com <http://www.taitradio.com/>
> > <http://www.taitradio.com <http://www.taitradio.com/> >
> > dave.elder@xxxxxxxxxxxxx
> </mc/compose?to=dave.elder@xxxxxxxxxxxxx>
> > TAIT: THE RIGHT FIT
> >
> >
> > On 8 July 2010 06:10, Les Wong
> <maveric0@xxxxxxxxxxx
> > </mc/compose?to=maveric0@xxxxxxxxxxx>>
> wrote:
> >
> > Hi All
> >
> > Dbcheck used to
> removed duplicate vias, dbdoctor does not do
> > this any more.
> > How is everyone
> dectecting and removing duplicate vias ?
> >
> > Thanks,
> > Les
> >
> >
> -----------------------------------------------------------
> To subscribe/unsubscribe: Send a message to
> icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
