[PCB_FORUM] Re: Adding a via to a .dra file...

Hi Thrulow,

Did that, still didn't help.  What it appears I have to do is
"Layout/Connections" and basically "route" the vias inside the ePad.  Not
quite there, but seems close...

Regards,

Austin


> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Thurlow DeHorsey
> Sent: Tuesday, May 19, 2009 4:21 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: Adding a via to a .dra file...
>
>
> Add the via type in constraints/physical. Even add multiple types.
>
> Thurlow
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> Sent: Tuesday, May 19, 2009 4:17 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Adding a via to a .dra file...
>
> Hi,
>
> OK, I give up.  How on earth do I add a via (to an epad) in a .dra file?
> I
> can add it as a pin (mechanical or connect) under "layout/pins", but
> that
> doesn't do what I want.  I want it to come out as type "via", not type
> "pin".
>
> I've done this before, but for the life of me, I just can't figure out
> how...
>
> Thanks,
>
> Austin
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: