[PCB_FORUM] Re: ".ASC"

  • From: "Soledad Attia" <SAttia@xxxxxxxxxxxxxx>
  • To: <icu-pcb-forum@xxxxxxxxxxxxx>
  • Date: Tue, 2 Oct 2007 10:05:34 -0700

Thank you all,

 

I'm waiting for the reply from vendor to see if they can give me a
script or

A sample of what they need.

 

Thanks for all of your suggestions, they have been very helpful

Regards

 

Soledad

 

 

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Glaze, Darwin
Sent: Tuesday, October 02, 2007 8:59 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: ".ASC"

 

Soledad,

 

One of the vendors we use requires that I open the .cad file and replace
the word GEOMETERY (every instance of the word) with FULL_GEOMETERY.
They kept saying that the cad file wasn't a ASCII file until changed the
file. Don't ask me why but it worked for them.

 

Hope this helps.

 

Darwin Glaze

Ball Aerospace

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Soledad Attia
Sent: Tuesday, October 02, 2007 9:38 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] ".ASC"

 

 

Hello  all,

 

 

Thanks to all who helped with the ".CAD" file ; I generated the file and
sent to vendor;

But now they are saying this format is not a standard CAD format,

They need an .ASC file for ICT fixturing.

 

Does anyone have any idea?

 

Thanks for again for your help

 

Soledad Attia

Printronix Inc.

----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
----------------------------------------------------------- 


This message and any enclosures are intended only for the addressee.
Please  
notify the sender by email if you are not the intended recipient.  If
you are  
not the intended recipient, you may not use, copy, disclose, or
distribute this  
message or its contents or enclosures to any other person and any such
actions  
may be unlawful.  Ball reserves the right to monitor and review all
messages  
and enclosures sent to or from this email address.

Other related posts: