[PCB_FORUM] Re: ".ASC"
- From: "Glaze, Darwin" <dglaze@xxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 2 Oct 2007 09:58:45 -0600
Soledad,
One of the vendors we use requires that I open the .cad file and replace
the word GEOMETERY (every instance of the word) with FULL_GEOMETERY.
They kept saying that the cad file wasn't a ASCII file until changed the
file. Don't ask me why but it worked for them.
Hope this helps.
Darwin Glaze
Ball Aerospace
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Soledad Attia
Sent: Tuesday, October 02, 2007 9:38 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] ".ASC"
Hello all,
Thanks to all who helped with the ".CAD" file ; I generated the file and
sent to vendor;
But now they are saying this format is not a standard CAD format,
They need an .ASC file for ICT fixturing.
Does anyone have any idea?
Thanks for again for your help
Soledad Attia
Printronix Inc.
----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
This message and any enclosures are intended only for the addressee. Please
notify the sender by email if you are not the intended recipient. If you are
not the intended recipient, you may not use, copy, disclose, or distribute this
message or its contents or enclosures to any other person and any such actions
may be unlawful. Ball reserves the right to monitor and review all messages
and enclosures sent to or from this email address.
Other related posts:
