[PCB_FORUM] Re: 8-way connections
- From: "Gerry Meier" <gerry.meier@xxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 15 Nov 2004 11:27:42 -0800
Jean,
Attach the snd full contact property to the pin and just manually add
some voids to create the relief or connections you want.
________________________________
From: Jean Bratton [mailto:jean.bratton@xxxxxxxxxxxxxx]
Sent: Monday, November 15, 2004 2:15 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] 8-way connections
Hi folks,
I have a surface mount DC-DC Converter with round pads which I would
like to connect to a top surface plane with an 8-way connection. I can
get it to work if I choose the "8 way connect" under the shape
parameters for smd pins, but I really don't want all my smd pins to
follow this rule, just this pin. I've tried to attach the
Dyn_Thermal_Con_Type = 8_way and/or the Dyn_thermal_Best_Fit = True
properties to the pin, but I still only get 4 connections. Any idea what
else I might try?
Thanks for the help!
Jean
Other related posts:
