[PCB_FORUM] Re: 3rd party netlists

grrrrr, ok well here I go. One of our vendors is using pads for layout. 
I am not sure what the details are but they used to get  an allegro 3rd 
part netlist and then used another
tool to convert that to a PADS ascii file. Since we moved to 15.2 they no 
are not able to translate 3rd party netlist.
So I was wondering if something has changed in the Allegro 15.2 3rd party 
netlist format?

;-)




Kevin McCowan 
Sent by: 
01/21/2005 01:38 PM
Please respond to
icu-pcb-forum@xxxxxxxxxxxxx


To
icu-pcb-forum@xxxxxxxxxxxxx
cc

Subject
[PCB_FORUM] Re: 3rd party netlists






C'mon. You know the rules.
Give us the details.
Version and any other necessary stuff.

Kevin McCowan

Andy_Kulik@xxxxxxx wrote:
> 
> Hi all and Happy Friday,
> 
> anyone know about differences in the netlist format Allegro can output 
> (File->Export->Netlist).
> A vendor of ours all of sudden can't read them anymore. Did something 
> change?
> 
> Andy
-----------------------------------------------------------
To subscribe/unsubscribe: 
                 Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
                 with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
                 Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE! 
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: