Hi In the install folder is a doc called algrologic.pdf (C:\Cadence\SPB_16.5\doc\algrologic ) There is a small sample in the pdf. You will also need to create device files for the footprints. Regards, Bill Zembek Technical Support - Allegro Specialist EMA Design Automation, Inc. 225 Tech Park Drive Rochester, New York 14623 Phone 585-334-6001 Opt 5 Fax 585-334-6693 www.ema-eda.com<http://www.ema-eda.com> http://support.ema-eda.com From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary Sent: Thursday, April 05, 2012 10:28 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] 3rd Party Netlist Hey guys, As usual, the Cadence Help is only so helpful! I want to create a 3rd party netlist file (i.e. not schematic driven), and the Help mentions the "Transferring Logic Design Data user guide in your documentation set" (in yellow below). Does anyone know where this "documentation set" is located, or have an example format for a netlist file? Thanks for any help [cid:image001.jpg@01CD1319.5B75F660] Regards, Gary MacIndoe Senior PCB Design Engineer EbD R&D Hardware Surgical Solutions Group Covidien 5920 Longbow Drive M/S A20 Boulder, CO 80301 303.476.7458 www.covidien.com<http://www.covidien.com>