[PCB_FORUM] Re: 16.0 could not find padstack

You might want to try to uprev your library

Good luck
Soledad

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gennadiy
Kiryukhin
Sent: Wednesday, October 03, 2007 9:28 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] 16.0 could not find padstack

Hello everyone,

Several days ago I installed 16.0.  When trying to Export  Physical, I 
get several errors about missing padstacks:
WARNING(SPMHNI-337): Unable to load symbol 'C_xxx' for device 
'CAP_C_xxx': WARNING(SPMHUT-127): Could not find padstack SMD32X38.
The padstack file is present and located under one of the paths in 
'padpath' variable.

Why does it complain?

Thanks,

-- 

Gennadiy Kiryukhin
Development Engineer
ATSI
8157 US Route 50
Athens, OH 45701
Phone: (740) 592-2874
Fax (740) 594-2875

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: