[PCB_FORUM] Re: 15.7 question... update shapes?

I go select the shape, right click and choose "Defer Dynamic Fill" and then 
"Done". This seems to refresh the shape. I've bound these commands to a hot 
key, so it's easier than it sounds.
 
 
 
Douglas G. Stanley
dstanley@xxxxxxxxxxxx
(949) 926-5889
 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of J-Charles TEYSSIER
Sent: Monday, August 06, 2007 11:07 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 question... update shapes?


To fix this kind of shape problem, i move it with a 0 increment (ix 0 0) so it 
is recalculated.

Jean-Charles

Gene Carman a écrit : 

        Every once in a while I get a V/S DRC telling me that a via and the 
shape are not happy.  Well, if I am already in the "smooth" mode, there really 
is no way to update the shapes.  The only way I know to "refresh" the shapes is 
to go "wiggle" a corner.  

        

        Is there some better way to "refresh" a shape?   

        

        Just for grins, is this "fixed" in 16.0?  

        

        Thanks

----------------------------------------------------------- To 
subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe To view the archives of this list go 
to http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send 
an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
-----------------------------------------------------------

Other related posts: