[PCB_FORUM] Re: 15.7 on Vista 32...

Austin,
	You need to check every file that was part of the download.
	
	If you look closely at the screenshot, you will notice that
	Vista was blocking a SKILL file with a ".il" file extension.

	The worst part is that Vista does not report the file as being
	blocked, making troubleshooting tedious.

Regards,
       Mike Finczak
       CopperCAD Design
       www.CopperCAD.com
       905-488-8958


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Monday, March 09, 2009 2:02 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...

Hi Mike,

Nope...that "feature" didn't exist for the lmgrd.exe file.  When I try
to
start it through services, I get a "didn't respond fast enough" or
something
like that.  I checked the version, and it's 10.8.0.7, which is the
correct
version for 15.7.

This is a new machine, with only one program installed since I got it
(Visio), else, it's stock.  So there can't be something else interfering
with it.

Regards,

Austin

  

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Mike Finczak
Sent: Monday, March 09, 2009 10:46 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...


Austin,
	There may be another problem, related to Vista's security
	features.

	Vista keeps track of the files origin. If it was downloaded
	from the web, Vista may silently block the file from running.

	In order for the download files to run, you may have to locate
	each one, right mouse click on the file properties, and then
	click the "Un-Block" button. (see the attached screenshot)

	Even with UAC turned off, Vista may still choose to block files.

	I found out about the this "Vista Feature" the hard way.

Regards,
       Mike Finczak
       CopperCAD Design
       www.CopperCAD.com
       905-488-8958


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin
    

Franklin
  

Sent: Monday, March 09, 2009 12:32 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...

Hi Bill,

This machine came with a "downgrade" option to use XP.  I may decide
    

to
  

do
so if I can't get this running easily.

Vista went out on it's own, when I plugged the key in, found and
installed
the HASP drivers out on the web I believe.  This could possibly be the
issue.  I may just uninstall everything, and try installing just the
security and get that working first.

Setting UAC off as Mike suggested didn't do anything.

Regards,

Austin

    

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Bill Dempsey
Sent: Monday, March 09, 2009 9:59 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...


Yes, I had it running on Vista but have since switched back to XP
since the
performance was so poor.
Never had an issue with lmgrd not running.

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin
      

Franklin
    

Sent: Monday, March 09, 2009 9:25 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] 15.7 on Vista 32...

Hi,

Is anyone here running 15.7 on Vista 32 with a USB key?  It seems
the lmgrd
driver won't start, and I'm wondering if anyone else ran into
this problem.

Regards,

Austin

-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

      

-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------


    

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------