[PCB_FORUM] Re: 15.7 on Vista 32...

Lmgrd is not run as a service (on my machine).  It is an executable from the
command line or gui.

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Monday, March 09, 2009 7:30 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...

 

Hi Bill,

 

I am able to get "lmhostid -flexid" to return the proper USB ID.  I am able
to put the USB key on another machine modify the license file to point to
that other machine, and I can bring up PCB Editor that way.  But I can't the
license "tools" on the Vista machine to work...yet.

 

What do you mean by "run as administrator" with respect to a service?  It is
setup for an automatic startup.  Hum.  Let me look into that...

 

Thanks,

 

Austin

 

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Bill Dempsey
Sent: Monday, March 09, 2009 6:04 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...

Whatever version comes on the Cadence CD.  I think it's 10.8.

Also, be sure to "run as administrator" (right click) when you start lmgrd.
The Aladdin drivers started right up.

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Monday, March 09, 2009 5:55 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...

 

Hi Bill,

 

Any idea what version of the drivers?

 

Best Regards,

 

Austin

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Bill Dempsey
Sent: Monday, March 09, 2009 4:07 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...

I used the 15.7 lmgrd.  I used the Aladdin drivers off of their website.  No
issues.

 

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Monday, March 09, 2009 3:53 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...

 

Hi,

 

Someone else did report here that they had 15.7 running fine on Vista...and
that their installation used lmgrd.  It would be good to know if another
version of lmgrd was used aside from the one that came with the standard
installation.  Perhaps you're right about the need to use a later version of
the key driver.  I hate this key stuff.

 

Regards,

 

Austin

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of fxf
Sent: Monday, March 09, 2009 1:11 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.7 on Vista 32...

SPB 15.7 was not supported on Vista. You might try obtaining the license
server portion from the 16.0 release where Vista
is supported. If you license via dongles, you need Vista compatible dongle
drivers which are not present in the 15.7 install.

Austin Franklin wrote: 

Hi Mike,
 
  

        In a standard, first time, Cadence installation, the pcbenv
        directory path is created at "C:\pcbenv. UAC allows the
        Cadence installer to create the directory, but UAC will
        prevent you from changing any files in that directory.
    

 
I do install the pcbenv underneath a subdirectory, so I should be all set
there.
 
Regards,
 
Austin
 
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
 
To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/
 
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
  

----------------------------------------------------------- To
subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe To view the archives of this list
go to http://www.freelists.org/archives/icu-pcb-forum/ Problems or
Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: