[PCB_FORUM] Re: 15.7 on Vista 32...

Hi Bill,

Any idea what version of the drivers?

Best Regards,

Austin
  -----Original Message-----
  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Bill Dempsey
  Sent: Monday, March 09, 2009 4:07 PM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] Re: 15.7 on Vista 32...


  I used the 15.7 lmgrd.  I used the Aladdin drivers off of their website.
No issues.



  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
  Sent: Monday, March 09, 2009 3:53 PM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] Re: 15.7 on Vista 32...



  Hi,



  Someone else did report here that they had 15.7 running fine on
Vista...and that their installation used lmgrd.  It would be good to know if
another version of lmgrd was used aside from the one that came with the
standard installation.  Perhaps you're right about the need to use a later
version of the key driver.  I hate this key stuff.



  Regards,



  Austin

    -----Original Message-----
    From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of fxf
    Sent: Monday, March 09, 2009 1:11 PM
    To: icu-pcb-forum@xxxxxxxxxxxxx
    Subject: [PCB_FORUM] Re: 15.7 on Vista 32...

    SPB 15.7 was not supported on Vista. You might try obtaining the license
server portion from the 16.0 release where Vista
    is supported. If you license via dongles, you need Vista compatible
dongle drivers which are not present in the 15.7 install.

    Austin Franklin wrote:

Hi Mike,           In a standard, first time, Cadence installation, the
pcbenv        directory path is created at "C:\pcbenv. UAC allows the
Cadence installer to create the directory, but UAC will        prevent you
from changing any files in that directory.     I do install the pcbenv
underneath a subdirectory, so I should be all setthere. Regards,
Austin -----------------------------------------------------------To
subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxxxxxx a subject of subscribe or
unsubscribe To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions:Send
an email to
icu-pcb-forum-admins@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-----------------  ---------------------------------------------------------
-- To subscribe/unsubscribe: Send a message to
icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or
unsubscribe To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send
an email to
icu-pcb-forum-admins@xxxxxxxxxxxxx -----------------------------------------
------------------

Other related posts: