[PCB_FORUM] Re: 15.7 - Out of date dynamic shape - "No Etch"...

One reason can be that shape is small: if it does not reach the minimum shape area (set un glabla dynamic shapes param ou can be set individuali shaoe by shape to override gloabal parameter) When shape is to small, no copper is meft and you get this message. One other reson can be "full" overlapping shape: only one "wins" and the other as no copper left. 

Jean-Charles

Austin Franklin a écrit :

Hi Jean,
That worked! Thank you very much. What is it that caused that? Is it just some random mistake when making shapes? Regards, Austin 

    -----Original Message-----
    *From:* icu-pcb-forum-bounce@xxxxxxxxxxxxx
    [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]*On Behalf Of *Jean Bratton
    *Sent:* Tuesday, May 19, 2009 10:09 PM
    *To:* icu-pcb-forum@xxxxxxxxxxxxx
    *Subject:* [PCB_FORUM] Re: 15.7 - Out of date dynamic shape - "No
    Etch"...

    Go to the color menu and in addition to the "etch" color item for
    that layer, turn on the "boundary" color item. You should be able
    to see it and delete it then.


    Jean Bratton

    Senior PCB Designer

    Freedom CAD Services, Inc.

    Office: 603-864-1349

    Email: jean.bratton@xxxxxxxxxxxxxx

    Visit us at http://www.freedomcad.com


    -----Original Message-----
    From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
    [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin
    Franklin
    Sent: Tuesday, May 19, 2009 9:30 PM
    To: icu-pcb-forum@xxxxxxxxxxxxx
    Subject: [PCB_FORUM] 15.7 - Out of date dynamic shape - "No Etch"...


    Hi,


    I have one shape that is claimed to be "out of date" and has a "No
    Etch"

    status.  But, I can't find the shape it's complaining about (or delete

    it)...  It says it's at a particular XY location, on a particular
    layer, but

    there is nothing there.  There was a shape there, and I've deleted
    that

    shape...but the "error" persists after the shape has been deleted.


    Anyone seen this before?  Any idea how to "cure" it?


    Thanks,


    Austin

    -----------------------------------------------------------

    To subscribe/unsubscribe:

    Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx

    with a subject of subscribe or unsubscribe


    To view the archives of this list go to
    http://www.freelists.org/archives/icu-pcb-forum/


    Problems or Questions:

    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

    -----------------------------------------------------------


-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: