[PCB_FORUM] Re: 15.7 - Out of date dynamic shape - "No Etch"...

Go to the color menu and in addition to the "etch" color item for that
layer, turn on the "boundary" color item. You should be able to see it
and delete it then.

 

 

 

Jean Bratton

Senior PCB Designer

Freedom CAD Services, Inc.

Office: 603-864-1349

Email: jean.bratton@xxxxxxxxxxxxxx

Visit us at http://www.freedomcad.com

 

 

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Tuesday, May 19, 2009 9:30 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] 15.7 - Out of date dynamic shape - "No Etch"...

 

Hi,

 

I have one shape that is claimed to be "out of date" and has a "No Etch"

status.  But, I can't find the shape it's complaining about (or delete

it)...  It says it's at a particular XY location, on a particular layer,
but

there is nothing there.  There was a shape there, and I've deleted that

shape...but the "error" persists after the shape has been deleted.

 

Anyone seen this before?  Any idea how to "cure" it?

 

Thanks,

 

Austin

-----------------------------------------------------------

To subscribe/unsubscribe: 

Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx

with a subject of subscribe or unsubscribe

 

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

 

Problems or Questions:

Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

-----------------------------------------------------------

JPEG image

Other related posts: