[PCB_FORUM] Re: 15.2 Slow performance

The Cadence Help line advised me on this 

Richard Weinberg
Agere Systems
207-846-4539

-----Original Message-----
From: Kevin McCowan [mailto:kmccowan@xxxxxxxxxxxxxx] 
Sent: Friday, February 25, 2005 8:41 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: 15.2 Slow performance

Did you let Cadence know about this?

Kevin McCowan
Sr. PCB Designer
TSI Telsys

Weinberg, Richard (Richard) wrote:
> I wanted to relate a FIX to the problem of poor performance in Allegro

> 15.2. Turn off all classes, under Manufacture | silkscreen
> 
>  
> 
> I was waiting 2-3 minutes to return to idle after moving a part. After

> changing the Ref des class to none, the rest were none already,  the 
> delay to idle is almost instantly.
> 
>  
> 
>  
> 
>  
> 
> __________________________________________________
> 
>                 systems             
> 
>   *agere*                             76 Sandy Point Road
> 
>                                                     Yarmouth, Maine
04096
> 
>                                                     USA
> 
>  
> 
> *Richard Weinberg*           Tel: 207 846 4539
> 
> Applications Engineer                 rweinberg@xxxxxxxxx
> 
>         ReferenceDesigns                                   
> 
>       ___________________________________________________
> 
>  
> 
>  
> 
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: