[PCB_FORUM] Re: 15.1 update shapes...

That was one of the first things I tried.
I got nothing like that in the report.
It turned out that there were 2 shapes with problems.
One was the type of my original problem, an unfilled
shape that should have been filled. And another shape
on an inner layer that I had thought that I had
deleted but the boundary was still there.
Nothing I tried detected where the shapes were or
what the problem was with them.
It was very frustrating.

Thanks,
Kevin

Moore, Blake wrote:
In 15.1 for your shape problems, I do this, Tools, reports, dynamic
shapes, then scroll through the report looking for shape = 0
That's the key, there can not be a shape = 0, then look at the layer,
etc...information on that shape, with your shape boundary turned on, go
to the by coordinates the report gave you. That will help you see the
shape problem.

-----Original Message-----
From: Kevin McCowan [mailto:kmccowan@xxxxxxxxxxxxxx] Sent: Wednesday, December 22, 2004 12:20 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: update shapes...

In 15.1 this is unfortunately not so.
The out of date shapes is just a little yellow square.
Not much good for anything.

Kevin

Julian Ungureanu wrote:

Mark,
I run 15.2 S43 on Solaris 8.
This is what I get when click the out of shape button:
(See attached).
I have positive shapes - that may be the difference.
All the buttons referring to shapes give reports when click on them.

Julian

-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum or go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: