I used Wayport at a hotel with success. All others of the type that I have found don't work. On Mon, 17 Nov 2008 17:22:38 -0600, Jenny Axler wrote: >Unfortunately, these just flat out do not work, neither do the Wayport/atwifi >hotspots normally found at McDonald's. I have had the exact same experience >as >you describe with all three types of networks. They have never worked, and >I'm >not sure whether that's something they will be able to fix at some point or >not. > >Jenny > >On Mon, 17 Nov 2008 16:59:59 -0500, Dave Hunt wrote: > > >>Hello! >> >>I'm running software build 1.1.22 on an Icon. When I connect to my >>home wifi network and a few others, it works perfectly. I tried >>connecting to an AT&T wifi hot spot, and cannot. The Icon finds it as >>an open netwirk, with signal strength of 30 to 45%. After a minute or >>two, I get "failed to connect" message. From then on, The Icon's >>wifi connection will not work until I reset the unit. >> >> >>Any ideas? >> >> >>-Dave >> >> >>If you reply to this message it will be delivered to the original sender >>only. >>If your reply would benefit others on the list and your message is related to >>LevelStar or APH then consider sending your message to >>icon-discuss@xxxxxxxxxxxxxx >> >> >>Icon Discuss Mailing List >>icon-discuss@xxxxxxxxxxxxx >>//www.freelists.org/list/icon-discuss >> >>To unsubscribe from the list send a blank message with unsubscribe in the >>subject line to: >> >>icon-discuss-request@xxxxxxxxxxxxx >> >>To post to this list, send your message to: >> >>icon-discuss@xxxxxxxxxxxxx >> >> >>For answers to the most frequently asked questions about Icon and Braille +, >>Visit >>the LevelStar and APH FAQ pages: >>Visit the LevelStar FAQ page at >>http://www.levelstar.com/support-faqs.php >>Visit the APH FAQ page at >>http://sun1.aph.org/webcast/brailleplus2/faq.html