Radek,
Thanks! I made three slight alterations below, but otherwise I agree
completely with your changes:
The Increment Format, for Usage In and InOut, defines a set of discrete
values not
smaller than min and not larger than max. Those values are defined in
increments
of delta with respect to typ, as typ + N*delta, where N is any integer
(positive,
negative, or zero) for which the value satisfies the expression min <=
typ + N*delta <= max.
The signs of typ, min, max and delta shall be positive and the relative
values shall
be min <= typ <= max.
If we receive no objections during today's meeting, I will submit this text as
part of 187.3.
Thanks again!
- MM
-----Original Message-----
From: radek_biernacki@xxxxxxxxxxxx [mailto:radek_biernacki@xxxxxxxxxxxx]
Sent: Tuesday, March 14, 2017 10:09 AM
To: Mirmak, Michael <michael.mirmak@xxxxxxxxx>; ibis-macro@xxxxxxxxxxxxx
Subject: RE: Draft BIRD187.3 (resend)
Hi Michael,
Please consider the following text.
The Increment Format, for Usage In and InOut, defines a set of discrete values
not smaller than min and not larger than max. Those values are defined in
increments of delta with respect of typ as typ + N*delta where N is any
integer (positive, negative, or zero) for which the value satisfies the
expression min <= typ + N*delta <= max. It is required that typ, min, max and
delta are all positive and that min <= typ <= max.
Radek
-----Original Message-----
From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] ;
On Behalf Of Mirmak, Michael
Sent: Monday, March 6, 2017 1:00 PM
To: IBIS-ATM (ibis-macro@xxxxxxxxxxxxx) <ibis-macro@xxxxxxxxxxxxx>
Subject: [ibis-macro] Draft BIRD187.3 (resend)
Please find enclosed a draft BIRD187.3 for review/discussion in the IBIS-ATM
Task Group.
If this meets with general approval, I can submit it to the Open Forum after
the ATM meeting.
Thank you!
- MM
---------------------------------------------------------------------
IBIS Macro website : http://ibis.org/macromodel_wip/
IBIS Macro reflector: //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
