[huskerlug] Re: Suse 9.0 won't autorun

On Friday 20 February 2004 09:23 pm, you wrote:
>       Every SuSE version I had always booted from the first CD, though I
> don't have 9.  So, something went wrong or, you might see in the
> DOSUTILS directory (I think that's the directory) if there aren't a few
> floppy isos for booting and modules and that should be enough for you to
> get the CD to work.   If that doesn't work, I would look for the CD isos
> elsewhere.   ---Jim

Strange.  For me, SUSE 9.0 and 9.2 booted and installed very well, but on four 
different boxes I couldn't get SUSE 9.1 to boot and/or complete the 
installation.  :-/

>
> Burke Smith wrote:
> > Thanks for making all of this available! I downloaded the Suse ISOs and
> > burned them to CDs successfully.
> >
> > It's my understanding that to start the install process all you have to
> > do is put CD1 into the drive, reboot the computer and with the computer
> > start sequence set to allow booting from CD the install process begins.
> > I don't get that result.
> >
> > During boot-up the computer seems to hang for awhile, spinning the CD
> > but after 20 to 30 seconds of this it goes on to its normal boot-up from
> > hard drive. I've successfully used the Knoppix CD so I know the computer
> > (an IBM P3, 450 mhz 300PL) can handle this type of process. Any thoughts
> > on how to get Suse working? Thanks for your help!
> >
> > Burke
> >
> > Carl Lundstedt wrote:
> >>Mandrake 10.0 RC1 (3 isos)
> >>SuSe 9.0 Pro (5 isos)
> >>Unreal 2004 demo (linux only, ~200 megs)
> >>
> >>http://crop.unl.edu/hlug/iso/
> >>
> >>Username: HLUG
> >>Password: Good45days
> >>
> >>I'm thinking of starting up a utdemo server in the future.  Maybe we can
> >>have a virtual lan party on it (next Wednesday?)..
> >>
> >>Let me know if you have any troubles with any of the links.
> >>
> >>Cheers,
> >
> > ----
> > Husker Linux Users Group mailing list
> > To unsubscribe, send a message to huskerlug-request@xxxxxxxxxxxxx
> > with a subject of UNSUBSCRIBE
>
> ----
> Husker Linux Users Group mailing list
> To unsubscribe, send a message to huskerlug-request@xxxxxxxxxxxxx
> with a subject of UNSUBSCRIBE


----
Husker Linux Users Group mailing list
To unsubscribe, send a message to huskerlug-request@xxxxxxxxxxxxx
with a subject of UNSUBSCRIBE

Other related posts: