[huskerlug] Re: A Couple of Questions

The DVD doesn't care whether it is the master or not.

It doesn't matter either way.

The whole IDE bus will be limited by the speed of the slowest device (ie
ATA33, ATA66, ATA100).

>       This is interesting to know, since from what I've seen you always have
> to have the DVD as the master.  It must work better on Linux!   ---Jim
>
> On Wednesday 17 September 2003 08:09, you wrote:
>> My CD-DVD reader is slave on IDE#2, and the CDBurner
>> (TDK 48x16x48x) is the master.
>>
>> Runs very fast, that way. and doesn't slow down the
>> hard drives...
>>
>> --- Cesar Delgado <cdelgad2@xxxxxxxxxxxxxx> wrote:
>> > Quick question....  In your lilo.conf file.  Do you
>> > have a kernel
>> > parameter telling the kernel which IDE port the
>> > burner is connected to?
>> >
>> > Example, my kernel parameter for my burner is:
>> > "kernel /vmlinuz-2.4.20 hdd=ide-scsi"
>> >
>> > This is because my burner is connected as a slave on
>> > the 2nd IDE
>> > chain...
>> >
>> > Just a thought,
>> >
>> > -Cesar Delgado
>> > ---------------------------------------------
>> > Research Computing Facility @ UNL
>> > http://rcf.unl.edu
>> > cdelgad2@xxxxxxxxxxxxxx, beettlle@xxxxxxxxxxx
>> >
>> > > -----Original Message-----
>> > > From: huskerlug-bounce@xxxxxxxxxxxxx
>> >
>> > [mailto:huskerlug-
>> >
>> > > bounce@xxxxxxxxxxxxx] On Behalf Of Roger W Feese
>> > > Sent: Tuesday, September 16, 2003 9:20 AM
>> > > To: huskerlug@xxxxxxxxxxxxx
>> > > Subject: [huskerlug] Re: A Couple of Questions
>> > >
>> > > Troy wrote:
>> > > > I am still having problems with the second
>> >
>> > question about my cd
>> >
>> > > > burner.  After I
>> > > > made sure that the ide-scsi module is loaded,
>> >
>> > the command
>> >
>> > > > cdrecord -scanbus
>> > > >
>> > > > still gives me the same error:
>> > >
>> > > Run dmesg (or look at the startup messages) -- do
>> >
>> > you see anything
>> > like
>> >
>> > > this in the output:
>> > >
>> > > SCSI subsystem driver Revision: 1.00
>> > > hdd: attached ide-scsi driver.
>> > > scsi0 : SCSI host adapter emulation for IDE ATAPI
>> >
>> > devices
>> >
>> > >   Vendor: HL-DT-ST  Model: CD-RW GCE-8481B   Rev:
>> >
>> > C102
>> >
>> > >   Type:   CD-ROM                             ANSI
>> >
>> > SCSI revision: 02
>> >
>> > > On my system, I also have the "scsi_mod" and "sg"
>> >
>> > modules loaded
>> >
>> > > in adittion to ide-scsi.
>> > >
>> > > -Rog
>> > >
>> > >
>> > >
>> > > ----
>> > > Husker Linux Users Group mailing list
>> > > To unsubscribe, send a message to
>> >
>> > huskerlug-request@xxxxxxxxxxxxx
>> >
>> > > with a subject of UNSUBSCRIBE
>> >
>> > ----
>> > Husker Linux Users Group mailing list
>> > To unsubscribe, send a message to
>> > huskerlug-request@xxxxxxxxxxxxx
>> > with a subject of UNSUBSCRIBE
>>
>> =====
>> Patrick, Linux User #65411 http://lugww.counter.li.org
>> http://knopper.net/knoppix   http://distrowatch.com
>> http://sourceforge.net
>> http://www.knoppix.net/docs/index.php/KnoppixCustomizations
>>
>> __________________________________
>> Do you Yahoo!?
>> Yahoo! SiteBuilder - Free, easy-to-use web site design software
>> http://sitebuilder.yahoo.com
>>
>> ----
>> Husker Linux Users Group mailing list
>> To unsubscribe, send a message to huskerlug-request@xxxxxxxxxxxxx with
>> a subject of UNSUBSCRIBE
>
> ----
> Husker Linux Users Group mailing list
> To unsubscribe, send a message to huskerlug-request@xxxxxxxxxxxxx
> with a subject of UNSUBSCRIBE




----
Husker Linux Users Group mailing list
To unsubscribe, send a message to huskerlug-request@xxxxxxxxxxxxx
with a subject of UNSUBSCRIBE

Other related posts: