[huskerlug] Re: A Couple of Questions

        This is interesting to know, since from what I've seen you always have
to have the DVD as the master.  It must work better on Linux!   ---Jim

On Wednesday 17 September 2003 08:09, you wrote:
> My CD-DVD reader is slave on IDE#2, and the CDBurner
> (TDK 48x16x48x) is the master.
>
> Runs very fast, that way. and doesn't slow down the
> hard drives...
>
> --- Cesar Delgado <cdelgad2@xxxxxxxxxxxxxx> wrote:
> > Quick question....  In your lilo.conf file.  Do you
> > have a kernel
> > parameter telling the kernel which IDE port the
> > burner is connected to?
> >
> > Example, my kernel parameter for my burner is:
> > "kernel /vmlinuz-2.4.20 hdd=ide-scsi"
> >
> > This is because my burner is connected as a slave on
> > the 2nd IDE
> > chain...
> >
> > Just a thought,
> >
> > -Cesar Delgado
> > ---------------------------------------------
> > Research Computing Facility @ UNL
> > http://rcf.unl.edu
> > cdelgad2@xxxxxxxxxxxxxx, beettlle@xxxxxxxxxxx
> >
> > > -----Original Message-----
> > > From: huskerlug-bounce@xxxxxxxxxxxxx
> >
> > [mailto:huskerlug-
> >
> > > bounce@xxxxxxxxxxxxx] On Behalf Of Roger W Feese
> > > Sent: Tuesday, September 16, 2003 9:20 AM
> > > To: huskerlug@xxxxxxxxxxxxx
> > > Subject: [huskerlug] Re: A Couple of Questions
> > >
> > > Troy wrote:
> > > > I am still having problems with the second
> >
> > question about my cd
> >
> > > > burner.  After I
> > > > made sure that the ide-scsi module is loaded,
> >
> > the command
> >
> > > > cdrecord -scanbus
> > > >
> > > > still gives me the same error:
> > >
> > > Run dmesg (or look at the startup messages) -- do
> >
> > you see anything
> > like
> >
> > > this in the output:
> > >
> > > SCSI subsystem driver Revision: 1.00
> > > hdd: attached ide-scsi driver.
> > > scsi0 : SCSI host adapter emulation for IDE ATAPI
> >
> > devices
> >
> > >   Vendor: HL-DT-ST  Model: CD-RW GCE-8481B   Rev:
> >
> > C102
> >
> > >   Type:   CD-ROM                             ANSI
> >
> > SCSI revision: 02
> >
> > > On my system, I also have the "scsi_mod" and "sg"
> >
> > modules loaded
> >
> > > in adittion to ide-scsi.
> > >
> > > -Rog
> > >
> > >
> > >
> > > ----
> > > Husker Linux Users Group mailing list
> > > To unsubscribe, send a message to
> >
> > huskerlug-request@xxxxxxxxxxxxx
> >
> > > with a subject of UNSUBSCRIBE
> >
> > ----
> > Husker Linux Users Group mailing list
> > To unsubscribe, send a message to
> > huskerlug-request@xxxxxxxxxxxxx
> > with a subject of UNSUBSCRIBE
>
> =====
> Patrick, Linux User #65411 http://lugww.counter.li.org
> http://knopper.net/knoppix   http://distrowatch.com  http://sourceforge.net
> http://www.knoppix.net/docs/index.php/KnoppixCustomizations
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
>
> ----
> Husker Linux Users Group mailing list
> To unsubscribe, send a message to huskerlug-request@xxxxxxxxxxxxx
> with a subject of UNSUBSCRIBE

----
Husker Linux Users Group mailing list
To unsubscribe, send a message to huskerlug-request@xxxxxxxxxxxxx
with a subject of UNSUBSCRIBE

Other related posts: