[huskerlug] Re: A Couple of Questions

My CD-DVD reader is slave on IDE#2, and the CDBurner
(TDK 48x16x48x) is the master.

Runs very fast, that way. and doesn't slow down the
hard drives...
--- Cesar Delgado <cdelgad2@xxxxxxxxxxxxxx> wrote:
> Quick question....  In your lilo.conf file.  Do you
> have a kernel
> parameter telling the kernel which IDE port the
> burner is connected to?
> 
> Example, my kernel parameter for my burner is:
> "kernel /vmlinuz-2.4.20 hdd=ide-scsi"
> 
> This is because my burner is connected as a slave on
> the 2nd IDE
> chain...
> 
> Just a thought,
> 
> -Cesar Delgado
> ---------------------------------------------
> Research Computing Facility @ UNL
> http://rcf.unl.edu
> cdelgad2@xxxxxxxxxxxxxx, beettlle@xxxxxxxxxxx
> 
> > -----Original Message-----
> > From: huskerlug-bounce@xxxxxxxxxxxxx
> [mailto:huskerlug-
> > bounce@xxxxxxxxxxxxx] On Behalf Of Roger W Feese
> > Sent: Tuesday, September 16, 2003 9:20 AM
> > To: huskerlug@xxxxxxxxxxxxx
> > Subject: [huskerlug] Re: A Couple of Questions
> > 
> > 
> > Troy wrote:
> > > I am still having problems with the second
> question about my cd
> > > burner.  After I
> > > made sure that the ide-scsi module is loaded,
> the command
> > 
> > > cdrecord -scanbus
> > 
> > > still gives me the same error:
> > 
> > 
> > Run dmesg (or look at the startup messages) -- do
> you see anything
> like
> > this in the output:
> > 
> > SCSI subsystem driver Revision: 1.00
> > hdd: attached ide-scsi driver.
> > scsi0 : SCSI host adapter emulation for IDE ATAPI
> devices
> >   Vendor: HL-DT-ST  Model: CD-RW GCE-8481B   Rev:
> C102
> >   Type:   CD-ROM                             ANSI
> SCSI revision: 02
> > 
> > On my system, I also have the "scsi_mod" and "sg"
> modules loaded
> > in adittion to ide-scsi.
> > 
> > -Rog
> > 
> > 
> > 
> > ----
> > Husker Linux Users Group mailing list
> > To unsubscribe, send a message to
> huskerlug-request@xxxxxxxxxxxxx
> > with a subject of UNSUBSCRIBE
> 
> 
> ----
> Husker Linux Users Group mailing list
> To unsubscribe, send a message to
> huskerlug-request@xxxxxxxxxxxxx
> with a subject of UNSUBSCRIBE
> 
> 


=====
Patrick, Linux User #65411 http://lugww.counter.li.org
http://knopper.net/knoppix   http://distrowatch.com  http://sourceforge.net
http://www.knoppix.net/docs/index.php/KnoppixCustomizations

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

----
Husker Linux Users Group mailing list
To unsubscribe, send a message to huskerlug-request@xxxxxxxxxxxxx
with a subject of UNSUBSCRIBE

Other related posts: